Compare Drilling products

Product	DM 280	DM 230	DM 220
	Remove	Remove	Remove
Included feature Optional feature Feature N/A
Features
Elgard™ Elgard™ If the motor runs at too high a load for a long period, it will start to pulsate. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine’s service life.
Softstart™ Softstart™ An electronic current limiter for softer starts. Full speed is reached about two seconds after the switch is turned on.
DM 280 compability DM 280 compability DM 280 can be used on all of Husqvarna’s larger drill stands, such as the DS 50 ATS.
Watercooled 3 speed gearbox Watercooled 3 speed gearbox Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.
Smart Start® Smart Start® By pressing the SmartStart button speed is reduced by half, which facilitate to start drilling.
Smart Start® Smart Start® By pressing the SmartStart button speed is reduced by half, which facilitate to start drilling.
Engine
Voltage	230 / 110 V	230 / 110 V	-
Power	2700 W	1850 W	1850 W
Phases	1	-	1
Speeds	3	3	3
Spindle speed full load low speed	240/540/930rpm	-	-
Spindle speed full load high speed	350/780/1340rpm	-	-
Rated output, W	1750/1850 W	1100/0 W	-
Rated current, A	13/25 A	8/15 A	-
Spindle speed idle high speed	440/970/1670 rpm	900/2150/4500 rpm	-
Spindle speed idle low speed	300/660/1140 rpm	-	-
Amperage	-	8 / 15 A	-
Output RPM at full load	-	500 / 1400 / 2900 rpm	-
1-phase rated voltage	-	-	230/115 V
Spindle speed full load	-	-	580/1400/2900 rpm
Drill bit
Max drill bit diameter, stand	350 mm / 14 inch	150 mm / 6 inch	150 mm / 6 inch
Max drill bit diameter, handheld	-	75 mm / 3 inch	80 mm / 3 inch
Dimensions
Weight	13 kg / 29 lbs	7 kg / 15.4 lbs	5.44 kg / 12 lbs

Product	AD 10
	Remove
Included feature Optional feature Feature N/A
Techdata
Weight	3.6 kg / 8 lbs
Speed	0-3.2 m/min / 0-10.5 fpm

Product	DM 406 H
	Remove
Included feature Optional feature Feature N/A
Engine
Motor	Hydraulic
Max output	9.3 kW / 12.5 hp(I)
Hydraulic flow	40 l/min / 45.5 l/min
Hydraulic pressure	140 bar
Output RPM	120 / 230 / 340 / 580 / 980 / 1400 rpm
Speeds	6
Water coupling	R 1/2
Output on spindle, kW	6 kW
Drill bit
Max drill bit diameter, stand	650 mm / 25.6 inch
Min drill bit diameter	50 mm / 1.97 "
Dimension
Weight	16 kg / 35 lbs

Product	DS 450	DS 250	DS 150	DS 70 ATS	DS 50 ATS	DS 50 Basic	DS 50 Gyro	DS 40 Gyro
	Remove	Remove	Remove	Remove	Remove	Remove	Remove	Remove
Included feature Optional feature Feature N/A
Cutting equipment
Max drill bit diameter	450 mm / 17.72 inch	250 mm / 9.84 inch	150 mm / 6 inch	650 mm / 25.6 inch	350 mm / 13.8 inch	300 mm / 11.8 inch	350 mm / 14 inch	150 mm / 5.9 inch
Travel length	635/0 mm / 25/0 inch	685/0 mm / 26.97/0 inch	-	680/0 mm / 26.8/0 inch	670/0 mm / 26.4/0 inch	600/0 mm / 23.6/0 inch	670/0 mm / 26/0 inch	600/0 mm / 24/0 inch
Travel length	-	-	495 mm / 19 inch	-	-	-	-	-
Max drill bit length	-	-	-	-	600 mm / 23.6 "	600 mm / 23.6 "	-	-
Other specs
Suitable for	DM 280, DM 340	DM 280, DM 230	DM 230	DM 406, DM 280	DM 280	DM 280	DM 280	DM 230
Column
Tilting	-	-	-	Continuous	Continuous	No tilting	Continuous	Continuous
Angling	-	-	-	+/-90º	+/-90º	-	+/-90º	+/-90º
Length, telescopic stanchion	-	-	-	-	-	-	3.1 m / 125 inch	3.1 m / 122 inch
Dimensions
Weight (excl. cutting equipment)	-	-	-	37 kg / 82.22 lbs	-	-	56.5 kg / 141 lbs	-
Weight incl. carriage	-	-	-	37 kg / 0 lbs	26.5 kg / 0 lbs	23.5 kg / 0 lbs	56.5 kg / 125.6 lbs	30.5 kg / 0 lbs
Packaging size, LxWxH	-	-	-	-	-	520x360x1030 mm / 20.5x14.2x40.6 inch	1981.2x914.4x609.6 mm / 78x36x24 inch	550x330x1950 mm / 21.7x13x77 inch
Weight incl. packaging	-	-	-	-	-	33 kg / 73.33 lbs	70 kg / 155 lbs	53 kg / 117.78 lbs
Base plate
Weight of base plate	-	-	-	-	-	-	-	7.9 kg / 17.56 lbs

Product	DMS 160 A	DMS 160 AT	DMS 160 Gyro	DMS 240
	Remove	Remove	Remove	Remove
Included feature Optional feature Feature N/A
Engine
Input power	1550 W	1550 W	1550 W	2400 W
Voltage	230 / 110 V	230 / 110 V	230 / 110 V	230 / 110 V
Phases	1	1	1	1
Amperage	6 / 13 A	6 / 13 A	6 / 13 A	9 / 20 A
Spindle speed full load	1100 rpm	1100 rpm	1100 rpm	-
Rated output, W	0/950 W	0/950 W	0/950 W	1500/0 W
Rated current, A	6/13 A	6/13 A	6/13 A	9/20 A
Spindle speed full load 2 values	-	-	-	185/455 rpm
Drill bit
Max drill bit diameter	120 mm / 4.7 inch	120 mm / 4.7 inch	120 mm / 4.7 inch	250 mm / 10 inch
Drill connection	R 1/2"	R 1/2"	R 1/2"	1" 1/4
Travel length	-	-	-	685.8/0 mm / 27/0 inch
Column
Column height	840 mm	890 mm	890 mm	1000 mm
Dimensions
Total weight	10.5 kg	12 kg	31.4 kg	23.3 kg

Product	VP 200
	Remove
Included feature Optional feature Feature N/A
Engine
Power output	0.55 kW
Vacuum tank volume	5 lit / 1.32 gal.
Air Flow	< 200 l/min / < 7.06 cfm
Max. vacuum	0.9 bar / 0.06 psi
Dimensions
Product size, LxWxH	54x30x90 cm / 21.26x11.81x35.43 inch
Weight	19 kg / 42.2 lbs

Product	PP 325 E
	Remove
Included feature Optional feature Feature N/A
Engine
Power output	9.3 kW
Voltage	400 V
Rated current, A	16 A
Hydraulics
Hydraulic flow, max	40 l/min / 10 gal/min
Hydraulic pressure	min: 0 bar; max: 140 bar / min: 0 psi; max: 9.65 psi
Equipment
Suitable for	WS 325, DM 406, K 3600, K 2500
Dimensions
Weight incl. oil and hoses	95 kg / 205 lbs