Maintenance


How to change to a terrain kit on your Husqvarna Automower® 400-series

When it’s slippery, or if you have slopes on your lawn, our terrain kit helps your Automower® to perform. This guide shows you how you can easily switch to a terrain kit. If you have an Automower® 300-series go here for instructions:

How to change to a terrain kit on your Husqvarna Automower® 300-series
No Image Available

Checklist for mounting a terrain kit:

  1. Turn the Automower® upside down
  2. Put a flatbed screwdriver under the wheel cap and bend it outwards to remove it
  3. Use a socket wrench to loosen the nut
  4. Remove the tyre
  5. Place the square nut in the plastic slot
  6. Put the brush holder in place and screw it tight. Note that there is one brush holder for the left side (L) and one for the right side (R).
  7. Place the brush in the second brush holder and attach it with the hex key.
  8. Put the terrain kit wheel in place
  9. Place the washer and nut in place, and tighten it with the socket wrench
  10. Reattach the wheel cap

Related articles

  • Lawn and Garden

    How to change to a terrain kit on your Husqvarna Automower® 300-series

    When it’s slippery, or you have slopes on your lawn, our terrain kit helps your Automower® to perform. This easy guide shows you how you can easily equip your mower with a terrain kit. If you have an Automower® 400-series go here for instructions:

  • Lawn and Garden

    How to regularly clean your Husqvarna Automower®

    It is important to keep your Automower® clean for the best performance and a long service life. A mower with a lot of clippings attached also handles slopes poorly. It is recommended to clean it using a brush, spraying with water, or use a damp cloth. Never use running water, high-pressure washer, or solvent, when cleaning your Husqvarna Automower®.

  • Lawn and Garden

    How to change the cutting blades on your Automower®

    When the blades become worn, or when the tip of the grass blades begin to whiten and look frayed when cutting, you should change the blades on your Automower® to maintain performance. Make sure you always use original blades and screws, and always replace the screw at the same time as the blade when carrying out maintenance, otherwise the screw can be worn out and cause the blade to come loose when operating.