Husqvarna PG 530

Husqvarna PG 530 – tai planetinis šlifuoklis, kurį galima įsigyti tiek vienfazės, tiek trifazės versijų, neprilygstamo pajėgumo ir puikiai atitinkantis buitinius ir nedidelio masto komercinius tikslus. PG 530 suderintos naujausios technologijos, kad jis būtų našesnis ir galingesnis už visas kitas parduodamas jo klasės planetines mašinas su trimis galvutėmis.

Pritaikymo būdai ir pranašumai
Techninės specifikacijos
Rekomenduojami įrankiai
Naudojimo instrukcijos
Dokumentacija

Pranašumai

Pritaikymo spektras

Pritaikymo spektras
Pritaikymo spektras - nuo betoninių grindų paruošimo ir taisymo iki betoninių grindų šlifavimo bei poliravimo, o taip pat "terrazzo" bei kitokių natūralaus akmens grindų taisymo ir poliravimo.
Didelės galios mašinos

Didelės galios mašinos
Didelės galios mašinos pajėgios pasiekti aukštų našumo rodiklių, didinant pelną ir taupant brangų laiką.
Tvirta mašina

Tvirta mašina
Dėl labai atsparios konstrukcijos mašina ne tik atrodo patraukliai, bet yra tvirta bei galinga.
Daugialypės paskirties galimybės

Daugialypės paskirties galimybės
Įvairialypės pritaikymo galimybės. Nepaprastai įvairiapusė įrangos veikimo sritis.
Visapusiškai išbandyta ir ištestuota

Visapusiškai išbandyta ir ištestuota
Visapusiškai išbandyta ir ištestuota šiuolaikiškuose projektuose įranga garantuoja technologinį efektyvumą didžiojoje dalyje pritaikymo sričių ir situacijų.
Žema kaina

Žema kaina
Mažos įrankių ir techninės priežiūros sąnaudos vienam kvadratiniam metrui.
5-riopai užsandarintas mechanizmas

5-riopai užsandarintas mechanizmas
Unikalus penkiakryptis sandarinimo mechanizmas apsaugo guolius ir vidines dalis nuo agresyvių betono dulkių ir skystųjų atliekų, todėl pailgėja eksploatavimo laikotarpis iki pirmosios mašinos techninės patikros ir tarp paskesnių patikrų.
Redi-lock

Redi-lock
„Husqvarna“ Redi Lock™ – deimantinių įrankių keitimo sistema, kuri veikia greitai ir sklandžiai. Tvirta konstrukcija užtikrina didžiausią jūsų deimantinių įrankių apsaugą ir ilgiausią eksploatavimo laiką.
Paviršiaus paruošimas ir betono poliravimas

Paviršiaus paruošimas ir betono poliravimas
PG 530, PG 680 ir PG 820 yra puikios mašinos visų rūšių šlifavimo ir poliravimo darbams dideliuose plotuose. Jos yra efektingos tiek dirbant sausai, tiek ir su vandeniu. Jų trigalviai šlifavimo mechanizmai perduoda didesnį spaudimą ir galią šlifavimo galvutėms, kurios atlieka labai stabilų nelygaus paviršiaus šlifavimą.

Galingi trifazės ar vienfazės įtampos modeliai.
Šlifavimo galva su 3 galvutėmis – jai gali būti perduodamas didesnis spaudimo slėgis ir galia. Stabilesnis darbas ant banguotų paviršių.
Sukimosi krypties keitimo funkcija (FWD / REV) ir reguliuojamas greitis.
Ilgesnė mašinos eksploatacijos trukmė dėl penkiagubo sandarinimo mechanizmo.
Krumpline pavara sukama planetinė galva; aukščiausios kokybės šlifavimo galvučių pavaros diržas.
Ypač atspari konstrukcija (tvirtas plieninis rėmas, vientisas aliuminio dangtis).
Sveria tik 200 kg.
Mažos įrankių sąnaudos.
Manevringa ir lengvai operatoriaus valdoma.

Ergonomiškai naudingas

Dėl ergonomiškos rėmo ir rankenos konstrukcijos poveikis operatoriaus kūnui valdymo metu yra nedidelis.
Geriausia šioje klasėje

Geriausios šioje klasėje darbo atlikimo, patikimumo ir ilgesnių tarpų nuo aptarnavimo iki aptarnavimo požiūriu.
Tvirti kietos gumos ratai

Riedėdama kietos gumos ratais mašina sklandžiau pjauna ir poliruoja.
Paprastas naudoti valdymo blokas

Valdymo dėžutė aiškiai paženklinta ir paprastai naudojama. Ja reguliuojamos ir valdomos įvairios mašinos funkcijos.

PG 530 techninės specifikacijos

Variklis
Galia	3,73 kW
Vardinė srovė, A	16 A
Įtampa	220 / 480 V
Įtampa	380 - 480 V
Fazės	3

Specf.
Šlifavimo plotis	530 mm

Matmenys
Svoris	215,46 kg

Rekomenduojami įrankiai

Modelis	G 11X1	Redi Lock G 1150	Redi Lock G 1120	Redi Lock G 1170	Redi Lock G 1140	Redi Lock G 1110
Optimalus Geras Priimtinas —
Medžiagos

Safety instructions

Safety instructions

Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operator’s manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
Unpacking

Unpacking

To prevent damage to the Grindng shrould when unpacking and transporting ensure to follow the recommended procedure as outline in the supporting video.
Setup workspace

Setup workspace

Position grinder on the working area. Set handle in upright position (illustrated right).

Pull back on handle using the kicker bar to lift grinding head off the ground.

Lay machine back on the ground.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Assembling diamonds

Assembling diamonds 1/3

Have a set of gloves ready, as diamonds can get very hot during dry grinding applications.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.

Assembling diamonds 2/3

As different applications require different selections of diamond tools, there will be many occasions when the grinding discs need to be changed.

Place diamonds as shown in the Redi Lock™ diamond holder disc and secure by tapping lightly. Assembly discs on planetary head lock screws by slightly rotating it.

Note

When using the machine, each grinding head should always have the same diamond type and number of diamonds as the other grinding heads. Each grinding head must have diamonds the same height as the other grinding heads.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.

Assembling diamonds 3/3

Adjust rubber skirt so that a good seal is established between the floor and head of the machine. Ensure join in skirt is at the front of the machine to allow for better air flow. Setting of the skirt is essential to obtain good dust extraction and minimise the possibility of airborne dust.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Adjusting Handlebar

Adjusting handlebar

Set handle to most comfortable working height using adjustment lever.

Note

It is recommended that this height be set as close as possible to the height of the operator’s hip bone. When the machine is running, there can be a slight grinding force/pull to one side that can be felt through the handlebars. Use the hip to resist this force instead of trying to control this through the arms (such positioning will be much easier for the operator using the machine over prolonged periods of time).
Connect DC

Connect DC

-Connect the hose to the PG Grinder.

-Connect the hose to the DC.

-Attach the plastic bag to the DC, if this is not already in place.

-Plug in the power cable to the DC.

Note

The power cable dipictad in the footage may vary from region to region.
Powering up machine

Powering up machine

Ensure the STOP/RUN switch is set on Stop (rotate counter clockwise).

Plug power supply to machine. Only turn power on at plug once fully connected.

Disengage Emergency Stop button (twist clockwise).

Depress Power button. On doing so, a soft “clunk” should be heard to come from within the electrical cabinet. This indicates the line contactors have engaged, supplying power to the drives/frequency converters.

Note

The power cable dipictad in the footage may vary from region to region.

Note

Always have the DC Vac running before starting to run the Grinder
Smooth start

Smooth start

Standing behind machine with handlebars set as described earlier, apply a small amount of downward pressure on the handle. Switch the machine to run mode using the STOP/RUN switch on the control panel.

The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.
Setting speed and rotation

Setting Speed and rotation

On the control panel there is a FORWARD / REVERSE and Speed dial knob. Generally, when starting the machine for the first time on any given application, it is advised the speed setting should not exceed 7, initially. When the operator is comfortable with the application, speed may be increased.

The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.
Same direction rotation

Same direction rotation 1/2

While in same direction rotation, the diamonds closer to the centre of the machine move in the opposite direction to the planetry rotation.

The diamonds toward the outside move in the direction of planetary rotation.

As the outer diamonds are being accelerated in the direction of planatery rotation they grind more aggressively creating an outer band where the machine cuts more effectively.

Same direction rotation 2/2

When the machine is moved forward, the middle zone is still ground more thoroughtly then the outer zones but not as much as in the case of counter rotation. The end result is a more even cut through the middle zone when compared to the outer zones, which is less prominate then in counter rotation.
Grind-pattern relevancy

Relevance of grind-patterns

All planetary grinders remove more stock from the middle of the grinder. Always overlap the outer zones to ensure efficient and clean grinding.

Remember to change the grinding rotation each pass to maintain a uniformed direction over the floor.
Grinding close to a wall

Grinding close to a wall

When the machine is in operation it will slightly pull to one side. This force is determined by the planetary head rotation. When the head of the machine pulls in to the wall the operator will get a much closer cut to the wall.

A comfortable operating position should allow the handle bar to rest firmly against the operator´s hip.
Diamond selection

Diamond selection

The way diamond segments are set-up on the grinding heads of the machine will also greatly influence the performance of the machine, the productivity levels and also the finished floor quality.
Application reference
Full set vs Half set

Full set vs Half set 1/3

There are basically two types of diamond configurations that can be used when using the Husqvarna PG grinders:

Full set of diamonds. When there are diamonds placed at all positions on the diamond holder discs.

Half set of diamonds. When there are diamonds placed at each alternating positions on the diamond holder discs.

By changing the way the diamonds are set-up on the diamond holder discs, an operator can significantly affect the performance of the machine and therefore the finished product.

Full set vs Half set 2/3

A full set of diamonds will cut a flater floor when compared to a half set of diamonds.

The full set will remove all the high spots instead of carring with the surface of the floor and droping down into the low or softer spots.

With a full set of diamonds the highest level of flatness will be achivied.

Full set vs Half set 3/3

A half set of diamonds will follow the surface of the floor.

The grinder can be placed on an uneven surface and yet still find a stable footing. The half-set diamond configuration should be used when a flat floor is not required.

The half set will carry over the high spots and into the low spots, which is ideal to remove floor coatings or glues where optimum flatness is not the overall objective.
Diamond vs single segment

Diamond vs single segment 1/3

As well as using full set and half set, the operator can also choose from double or single segment tools. This will enable the operator to have control over both his tool economy and productivity.

Double segments: A double segment tool consists of two diamond segments on one Redi Lock™ shoe.

Single segments: A single segment tool consists of one diamond segments on one Redi Lock™ shoe.

Diamond vs single segment 2/3

Double segments are more commonly used as there is less preasure on each diamond segment resulting in lower cost and longer tool life. In principle double segments are used on softer concrete to prevent unwanted excess removal of the concrete stock.

Diamond vs single segment 3/3

A single segment is more commonly used on very hard surfaces as this increases the grinding pressure per diamond segment. This will result in a higher productivity and more aggressive concrete stock removal.

A significantly shorter tool life can be expected when using single segments due to the increase in segment preasure.

Husqvarna PG 530

Pranašumai

Pritaikymo spektras

Didelės galios mašinos

Tvirta mašina

Daugialypės paskirties galimybės

Visapusiškai išbandyta ir ištestuota

Žema kaina

5-riopai užsandarintas mechanizmas

Redi-lock

Paviršiaus paruošimas ir betono poliravimas

Ergonomiškai naudingas

Geriausia šioje klasėje

Tvirti kietos gumos ratai

Paprastas naudoti valdymo blokas

PG 530 techninės specifikacijos

Rekomenduojami įrankiai

Modelis

Safety instructions

Safety instructions

Unpacking

Unpacking

Setup workspace

Setup workspace

Assembling diamonds

Assembling diamonds 1/3

Assembling diamonds 2/3

Assembling diamonds 3/3

Adjusting Handlebar

Adjusting handlebar

Connect DC

Connect DC

Powering up machine

Powering up machine

Smooth start

Smooth start

Setting speed and rotation

Setting Speed and rotation

Same direction rotation

Same direction rotation 1/2

Same direction rotation 2/2

Grind-pattern relevancy

Relevance of grind-patterns

Grinding close to a wall

Grinding close to a wall

Diamond selection

Diamond selection

Application reference

Full set vs Half set

Full set vs Half set 1/3

Full set vs Half set 2/3

Full set vs Half set 3/3

Diamond vs single segment

Diamond vs single segment 1/3

Diamond vs single segment 2/3

Diamond vs single segment 3/3

PG 530 dokumentacija