Husqvarna DM 280

(966 55 41-05)

Electric core drill for use with stand. DM 280 is an ideal choice for medium core drilling up to 350 mm diameter. The motor is very easy to operate and features several ergonomic features facilitating drilling and set up. Suitable for water evacuation, ventilation, angle drilling and stitch drilling.


  • Load indicator
  • Softstart™
  • Equipped with Elgard™ which indicates via the LED when the machine is overloaded. This allows the operator to always drill at maximum pressure and prevents engine damage and extends product life.
  • Pressing the SmartStart button reduces start speed by 50 %.
  • SoftStart™ – electronic current limiter means full speed is reached about two seconds after start.
  • The machine has a designed handle for easier transport and faster set-up.
  • The controls are designed and positioned to enhance ergonomics and facilitate operation.
  • The water hose can turn 180°, for greater flexibility in terms of setup configuration.
  • Durable and ergonomic design

    Durable and shock-proof, designed to protect the electronics. Easy to carry and install thanks to low weight and ergonomic design.

  • Reliable gearbox

    Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.

  • Elgard™

    The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life.

  • Easy start with reduced speed

    To facilitate making a starter hole, speed is reduced by half using the Smart Start® button.


  • Angle drilling
  • Barriers
  • Horizontal drilling
  • Stitch drilling
  • Water evacuation
  • Vertical drilling
  • Channels, pipes and cables