Husqvarna W 1210 Diagrip™

• Diagrip™, a revolutionary new technology for manufacturing segments, which yields superior cutting capacity, longer life and a smooth, rapid cut. • Also available with 3,8 mm blade thickness, for low-powered electric saws. • Three-groove segment design, “four segments in one”, to optimise segment cooling and disposal of saw slurry. This provides extremely good cutting speed and blade life.

600-1200 mm / 23.62-47.24 "

Benefits & Applications
Technical specifications
Fits to
Documentation
Article no.

Benefits

W 1200 Diagrip™ series

W 1200 Diagrip™ series
The W 1200 series has the revolutionary Diagrip™ technology distribution of diamonds, a unique three-groove segment design a three-layer sandwich core. All this gives superior cutting speeds, smooth and rapid cuts, low noise levels and long tool life.

Diagrip

Diagrip™ is a revolutionary new technology for producing diamond segments. The diamonds have a special treatment that ensures an optimal distribution. Also, the diamonds are held in the segment for longer, so they are utilised maximally. The result is blades with superior cutting capacity, longer life and a smooth, rapid cut.
Sandwich shape segments

Low noise wall saw blades: The core is a spot-welded, three-layer sandwich design with a copper centre. Compared to a standard solid core, the noise level is reduced from approx. 95 to approx. 85 dB. (However this figure may vary due to cutting depth, blade diameter etc. With continuous noise, a 10 dB drop represents a halving of the perceived noise.)
Efficient cooling

The design of the segments promotes the efficient cooling of the segments and steel plates, and helps to dispose of the abrasive saw sludge. This provides extremely good cutting properties and long service life.
Design of the segment

The design of the segments is based on power being concentrated to a very small contact surface between the segment and the material to be sawn. This results in a tool that starts in a smooth, controlled manner when you first apply the blade, and that is optimally free-cutting for the duration of its service life.

Technical specifications for W 1210 Diagrip™

Blade specs
Type	Wet
Power range, min-max	10-20 kW / 13.41-26.82 hp
Blade diameter range, min-max	600-1200 mm / 23.62-47.24 "
Center hole diameter	60 mm / 2.36 inch
Power range	Low powered wall saws
Suitable for	WS 325/WS 440 HF

Segment
Segment height	10 mm / 0.39 "
Segment base	3 mm / 0.12 "
Segment length	46 mm / 1.81 "
Segment width	4.7 mm / 0.19 "

Articles for W 1210 Diagrip™

Article no.	Article Description	Blade diameter	Segment width
505 03 58-01	Ø:600mm, Segment width:3.8mm, For low-powered electric saws	600 mm / 23.62 inch	3.8 mm / 0.15 "
505 03 58-02	Ø:500mm, Segment width:3.8mm, For low-powered electric saws with flush cutting holes	500 mm / 19.69 inch	3.8 mm / 0.15 "
505 03 59-01	Ø:600mm, Segment width:3.8mm, For low-powered electric saws	600 mm / 25.59 inch	3.8 mm / 0.15 "
505 03 59-02	Ø:600mm, Segment width:3.8mm, For low-powered electric saws with flush cutting holes	600 mm / 23.62 inch	3.8 mm / 0.15 "
505 03 59-03	Ø:600mm, Segment width:4.7mm	600 mm / 23.62 inch	4.7 mm / 0.19 "
505 03 59-04	Ø:600mm, Segment width:4.7mm, with flush cutting holes	600 mm / 23.62 inch	4.7 mm / 0.19 "
505 03 59-60	Ø:600mm, Segment width:4.7mm, low noise	600 mm / 23.62 inch	4.7 mm / 0.19 "
505 03 59-61	Ø:600mm, Segment width:4.7mm, low noise with flush cutting holes	600 mm / 23.62 inch	4.7 mm / 0.19 "
505 03 60-01	Ø:650mm, Segment width:4.7mm	650 mm / 25.59 inch	4.7 mm / 0.19 "
505 03 60-02	Ø:650mm, Segment width:4.7mm, with flush cutting holes	650 mm / 25.59 inch	4.7 mm / 0.19 "
505 03 61-01	Ø:700mm, Segment width:3.8mm, For low-powered electric saws	700 mm / 27.56 inch	3.8 mm / 0.15 "
505 03 61-02	Ø:700mm, Segment width:3.8mm, For low-powered electric saws with flush cutting holes	700 mm / 27.56 inch	3.8 mm / 0.15 "
505 03 61-03	Ø:700mm, Segment width:4.7mm	700 mm / 27.56 inch	4.7 mm / 0.19 "
505 03 61-04	Ø:700mm, Segment width:4.7mm, with flush cutting holes	700 mm / 27.56 inch	4.7 mm / 0.19 "
505 03 61-60	Ø:700mm, Segment width:4.7mm, low noise	700 mm / 27.56 inch	4.7 mm / 0.19 "
505 03 61-61	Ø:700mm, Segment width:4.7mm, low noise with flush cutting holes	700 mm / 27.56 inch	4.7 mm / 0.19 "
505 03 62-01	Ø:750mm, Segment width:4.7mm	750 mm / 29.53 inch	4.7 mm / 0.19 "
505 03 62-02	Ø:750mm, Segment width:4.7mm, with flush cutting holes	750 mm / 29.53 inch	4.7 mm / 0.19 "
505 03 63-01	Ø:800mm, Segment width:4.7mm	800 mm / 31.5 inch	4.7 mm / 0.19 "
505 03 63-02	Ø:800mm, Segment width:4.7mm, with flush cutting holes	800 mm / 31.5 inch	4.7 mm / 0.19 "
505 03 63-60	Ø:800mm, Segment width:4.7mm, low noise with flush cutting holes	800 mm / 31.5 inch	4.7 mm / 0.19 "
505 03 63-61	Ø:800mm, Segment width:4.7mm, low noise	800 mm / 31.5 inch	4.7 mm / 0.19 "
505 03 64-01	Ø:900mm, Segment width:4.7mm	900 mm / 35.43 inch	4.7 mm / 0.19 "
505 03 64-02	Ø:900mm, Segment width:4.7mm, with flush cutting holes	900 mm / 35.43 inch	4.7 mm / 0.19 "
505 03 64-60	Ø:900mm, Segment width:4.7mm, low noise	900 mm / 35.43 inch	4.7 mm / 0.19 "
505 03 64-61	Ø:900mm, Segment width:4.7mm, low noise with flush cutting holes	900 mm / 35.43 inch	4.7 mm / 0.19 "
505 03 65-01	Ø:1000mm, Segment width:4.5mm	1000 mm / 39.37 inch	4.5 mm / 0.18 "
505 03 65-02	Ø:1000mm, Segment width:4.5mm, with flush cutting holes	1000 mm / 39.37 inch	4.5 mm / 0.18 "
505 03 65-60	Ø:1000mm, Segment width:4.7mm, low noise	1000 mm / 39.37 inch	4.7 mm / 0.19 "
505 03 65-61	Ø:1000mm, Segment width:4.7mm, low noise with flush cutting holes	1000 mm / 39.37 inch	4.7 mm / 0.19 "
505 03 66-01	Ø:1200mm, Segment width:4.5mm	1200 mm / 47.24 inch	4.5 mm / 0.18 "
505 03 66-02	Ø:1200mm, Segment width:4.5mm, with flush cutting holes	1200 mm / 47.24 inch	4.5 mm / 0.18 "
505 03 66-60	Ø:1200mm, Segment width:4.7mm, low noise	1200 mm / 47.24 inch	4.7 mm / 0.19 "
505 03 66-61	Ø:1200mm, Segment width:4.5mm, low noise with flush cutting holes	1200 mm / 47.24 inch	4.7 mm / 0.19 "