Compare Handheld power cutting products

DEX

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you don’t have to pump manually...

X-Torq®

Engine with X-Torq® produces 75 % less emissions, 20 % lower fuel consumption and more power.

SmartCarb™

Built-in automatic filter compensation, maintains high power and lowers fuel consumption.

DuraStarter™

DuraStarter™ is a patented, dust-sealed starter attachment, where the return spring and the pulley bearing are sealed. This makes the starter virtually maintenance free, giving a further boost to the reliability of our cutters.

Reversible cutting arm

The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Sealed transmission

Reduces the wear and slippage risk.

Anti-vibration system

Our anti-vibration system reduces vibrations in the cutter handles, so they are more comfortable to hold and can be used for longer periods. To enable the user a comfortable operating position and to reduce strain, the distance between the handles is large. The handles and the short engine body mean the user always stands close to the machine, for easier handling and control.

Active Air Filtration™

The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times (for dry cutting) of up to one year, with no filter service required.

EasyStart

Ensures 50% easier starting by reducing the compression in the cylinder during starting.

Wet cutting kit

All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Active Air Filtration™

The new generation of Active Air Filtration™ is one of the most efficient air filtration systems on the market, delivering operational times (for dry cutting) of up to one year, with no filter service required.

Fuel indicator

Fuel indicator on the tank shows fuel level, to help avoid unnecessary stoppages.

Specially designed starter handle

Specially designed starter handle, with room for heavy gloves.

Adjustable carry strap

Adjustable carry strap allows full freedom of movement.

Chromium-plated blade guard

Chromium-plated blade guard, visible in smoke and water spray, enhances control of the cutter.

Huge potential

By using K 970 Ring on pipe diameter up to 260 mm, the cut can be made from one position.This saves a lot of unnecessary digging which, in turn, saves time and money with less filling and finishing work.

The K 970 Chain

The K 970 Chain can make openings as small as 11✕11 cm, and is perfect for openings with irregular shapes.

Fast, stable mounting

Fast, stable mounting of the attachment onto the rail.

Double attachment mountings

Double attachment mountings allow cutting from both directions.

Wet or dry, indoor and outdoor

Well suited for wet or dry cutting, indoor and outdoor

Concrete and masonry

Cutting of concrete and masonry in alteration, renovation and new building.

Metal

Metal cutting

Elgard™

The advanced electronic overload protection – varies the rotation speed to warn of approaching overload.

Pulling rotation

Pulling rotation reduces the risk of sticking and kickback.

Electronic Softstart™

Provides starting with normal, slow acting fuses.

Wet cutting capability, indoors and outdoors

The K 3000 Wet enables convenient, dust-free cutting indoors.

Integrated regulator

K 3000 Wet has an integrated regulator that controls the water volume, ensuring a constant flow to the blade. The amount of water is sufficient to bind the dust without creating an excess of water.

DEX

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you don’t have to pump manually...

Generously dimensioned mitre gear

Generously dimensioned mitre gear provides high durability, minimal power loss and low noise levels.

High power output

High power output on both 3-phase (5.5 kW) and 1-phase (3 kW) at 220 – 240 V.

Ergonomic design

Ergonomic design with optimally positioned handles.

Overload protection

LED indicator helps the operator work with optimal power and warns if there is a risk for motor overload.

Flexible power

Operates with both 3- and 1-phase power.

Built-in intelligence

The intelligent motor ensures optimal power and rpm for each cutting job. Wet cutting is supported, with easily adjustable water flow during operation. The water flow starts first when the trigger lock-out is activated.

Durable ergonomic design

Easy to carry and use thanks to low weight and ergonomic design. Durable design with encapsulated motor gives this machine low service requirements.

Deep cutting indoors

Efficient electric cutter with easy to handle technique for cutting up to 400 mm deep.

Ideal for flush cutting

The K 3000 Cut-n-Break is ideal for flush cutting, since its adjustable bladeguard allows cutting close to walls and floors.

Wet cutting kit

All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Hydraulic gear motor

Blade brake

Servo for RPM control

Reversible cutting arm

The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Replaceable arbor bushing

Peripheral drive

Adjustable front handle

Automatic start for water flow

DEX

DEX is a dust management system for wet and dry cutting, which contains several solutions. The Vac attachment on the K 3000 Vac and the DC 1400 are two solutions within this system. Most of the power cutters have a water-saving wet cutting kit, which ensures that exactly the right amount of water is used to bind the dust. This results in cleaner cutting with less water usage and slurry, compared to traditional wet cutting. The mobile battery- powered water tank WT 15 is available as an accessory, which means that you don’t have to pump manually...

Air motor

Wet cutting kit

All our cutters except the K 3000 Electric feature our robust new wet cutting kit, with low water usage.

Automatic mist lubrication

Reversible cutting arm

The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.

Replaceable arbor bushing

Powerful lithium-ion battery and charger

Husqvarna WT 15 comes equipped with a Lithium-Ion battery, charger and a Gardena spray nozzle, conveniently placed in a compartment on the WT 15. A fully charged battery will give a continous running time of 45 minutes.

Autostop function

The advanced water tank has an autostop function that safely stops the machine when the water runs out. Also, an indicator shows the battery level.

Convenient transport

When transporting the WT 15 the water hose is conveniently wound around the replaceable bottom and the coupler at the end placed in the designated slot.

Two-speed pump

There is a higher capacity function of the pump built into the electronics. By pushing the switch 1.5-2 seconds the pump will work with double speed giving twice the amount of water. This function is particularly useful together with the Gardena spray nozzle to clean off the machine after work. This function can of course also be used if a cutting job requires extra water for some reason.

Low weight, ergonomic design

Easy to carry and use thanks to low weight and ergonomic design.

Digital display

Digital menu and display for efficient control and service of the unit.

Flexible power

Operates with both 3- and 1-phase power.

Air cooled

Water connection is only needed for wet cutting.

Automatic setup

Automatic detection and setup of connected equipment and powersource makes handling easy.

Automatic Power-on-demand

Automatic Power-on-demand saves fuel and has a five second delay for smoother tool operation during intermittent cutting conditions.