The CS 10 is a very useful and efficient saw system, thanks to a number of smart solutions. The saw is coupled to our electric wall saws WS 482 HF or WS 440 HF. It can be mounted on both sides of the track, and the wire’s direction of rotation is reversible. You can saw both vertically and horizontally. Plus there’s no need for water for dry cuts in cases when slurry is a concern.
Allows excellent control of the sawing process and gives you the freedom to move around the worksite.
The CS 10 can be combined with the WS 482 HF and WS 440 HF wall saws, forming a complete and flexible wire and wall cutting system. Suitable power packs are the PP 480 HF and PP 440 HF.
The CS 10 can be combined with the WS 482 HF or the WS 440 HF wall saws, forming a complete and flexible wire and wall cutting system.
Its compact design makes CS 10 easy to operate, transport and store.
Possible to saw both vertically and horizontally. The saw head can be mounted on either side of the track and the direction of the wire is reversible.
Together with WS 482 HF or WS 440 HF, you can use a remote control, that has a logical and ergonomic design with a large and clear display, which shows the current performance of the saw.
Thanks to compatibility between wall and wire systems.
Cutting in thick walls and openings with precise corners.
The saw has a flexible design and can easily be mounted on objects like pipes.
The saw can be installed to cut on the right or the left. This gives great flexibility during installation and when selecting the direction of the cut.
Wire saw conversion kit
Swivel pulley, slide, for pulley systems.
Swivel pulley bearing for round tubes.
Pipe for pulley systems.
Pipe for pulley extension.
Tool and screw set.
Foot for pulley systems.
Wear rubber pulleys, Ø 200 mm
Wear rubber drive wheel, Ø 400 mm.
Copyright © 2008-2014 Husqvarna AB (publ). All rights reserved. All prices shown are recommended retail prices.
Find your local Husqvarna salesman or dealer using the dealer locator.