HUSQVARNA Rider 15V2 AWD

AWD-variant of a truly well-equipped and high-spec model in the consumer series. The power from the two-cylinder Kawasaki OHV-engine, together with the unique manoeuvrability and the reliable AWD-transmission make the machine even more enjoyable and useful. The All-Wheel-Drive remarkably increase and secure the trafficability on uneven areas and slippery grounds. Prepared to carry Combi cutting deck from 103 - 112 cm. For the rest of the year, a wide range of accessories is available. Independently on the condition of the surfaces.

Kawasaki, 8.3 kW[1], Hydrostatic AWD, 94-112 cm / 37-44 inch

HUSQVARNA Rider 15V2 AWD
View large image

Features for Rider 15V2 AWD

  • Versatile usage
  • Robust chassis
  • Control panel
  • AWD transmission
  • Front head lights
  • Comfort seat
  • Easy access
  • Four large wheels
  • Combi cutting deck with BioClip® (mulching)
  • Combi cutting deck with rear discharge
  • Unique articulated steering

    Unique articulated steering

    The unique articulated steering system allows the rear pair of wheels to swing in underneath the machine. The result is superior manoeuvrability with a minimum turning radius at full lock.

  • Front-mounted cutting deck

    Front-mounted cutting deck

    Front-mounted cutting deck for excellent accessability into corners and under bushes, park benches etc.

  • All-Wheel-Drive (AWD)

    All-Wheel-Drive (AWD)

    All-Wheel-Drive (AWD) ensures traction on uneven, wet and slippery areas and slopes. AWD automatically adjusts the traction on all wheels depending on situation and ground condition.

  • Service position

    Service position

    Service position on the cutting deck facilitates cleaning and service.

  • Kawasaki FH-series

    Kawasaki FH-series

    Kawasaki V-twin, overhead-valve engine with full pressure lubrication and spin-on oil filter. Combines exceptional power and torque with fuel efficiency and reduced emissions.

  • 1) The power rating of the engines indicated is the average net power output during a normal working situation and fulfilling applicable noise regulations (at specified rpm) of a typical production engine for the engine model measured to SAE standard J 1349/ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables. (Europe only)