Husqvarna K 3600 MK II

(968 42 41-01)

The Husqvarna K 3600 is a cutter with performance and features that make it unique. The eccentric drive of the blade means the cutting depth is a huge 270 mm. Its unique power / weight ratio and its hydraulic drive make for a highly efficient and manoeuvrable handheld cutter. It is well suited to a wide range of applications, including both brick and reinforced concrete. The combination of large cutting depth and high capacity without set-up time make the K 3600 one of the most productive tools in the business.


  • Hydraulic gear motor
  • Peripheral drive
  • Adjustable front handle
  • Automatic start for water flow
  • The machine’s high power-to-weight ratio and hydraulic drive make for a very efficient and easily manoeuvrable handheld cutter.
  • A 270 mm cutting depth with a 370 mm blade, thanks to the eccentric drive.
  • Stable support rollers for easy adjustment and blade change.
  • Sealed drive and roller system.
  • Adjustable front handle and convenient, integrated water adjustment makes operation easier and more efficient.
  • Large lower spray guard and integrated support foot.
  • Low weight and ergonomic design.
  • Simple service and cleaning.
  • Cutting ring

    The cutting ring on the K 3600 is fixed and supported by four roller bearings at the periphery of the blade. Two of these are guide runners that run in the slot on the side of the ring, pressing it forward and into a drive wheel, which gives better control and longer service life.

  • Cutting depth

    With the peripheral drive, the cutting depth is not limited by a blade spindle, and you can cut far deeper than with a traditional cutter with a centre-driven blade. The cutting depth of 270 mm (10.6") is sufficient to cut through a normal wall from one side.

  • Light cutter with high power

    Hydraulics is an excellent way to transfer high power without the actual cutter becoming heavy.

  • Good working conditions

    Running a hydraulic cutter means you avoid fumes and high noise levels, so they are ideal for both in- and outdoor jobs.


  • Adjustment to openings
  • Blocks, curbstones and pavers
  • Cast concrete
  • Deep cutting
  • Floors and walls
  • Pipe trenches
  • Pipes