Husqvarna DM 340

An easy to operate drill motor from Husqvarna. The DM 340 features an ergonomic handle that makes it easy to carry around. The controls are designed and positioned to further enhance ergonomics and to facilitate drilling and set up. The DM 340 is designed for medium core drilling up to Ø 400 mm together with Husqvarna drill stands. The machine has three gear stages, so the operator can find the optimal drilling speed. The LED indicator shows the load of the machine, allowing drilling at maximum pressure, for best performance.

Husqvarna DM 340
View more images

Benefits

  • Overload protection
  • Softstart™
  • Equipped with Elgard™ which indicates via the LED when the machine is overloaded. This allows the operator to always drill at maximum pressure and prevents engine damage and extends product life.
  • When making a starter hole speed can be reduced by half using SmartStart.
  • SoftStart™ – electronic current limiter means full speed is reached about two seconds after start.
  • The machine has a designed handle for easier transport and faster set-up.
  • The controls are designed and positioned to enhance ergonomics and facilitate operation.
  • The water hose can turn 180°, for greater flexibility in terms of setup configuration.
  • Smart Start®

    Smart Start®

    By pressing the SmartStart button speed is reduced by half, which facilitate to start drilling.

  • Watercooled 3 speed gearbox

    Watercooled 3 speed gearbox

    Watercooled 3 speed gearbox for optimal drilling performance and longer service intervals.

  • Load indicator

    Load indicator

    The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.

Applications

  • Angle drilling
  • Barriers
  • Horizontal drilling
  • Stitch drilling
  • Water evacuation
  • Vertical drilling
  • Channels, pipes and cables