Husqvarna W 1205 Diagrip™

• Diagrip™, a revolutionary new technology for manufacturing segments, which yields superior cutting capacity, longer life and a smooth, rapid cut. • Also available with 3,8 mm blade thickness, for low-powered electric saws. • Three-groove segment design, “four segments in one”, to optimise segment cooling and disposal of saw slurry. This provides extremely good cutting speed and blade life.

Benefits & Applications
Technical specifications
Fits to
Documentation
Article no.

Benefits

Diagrip

Diagrip™ is a revolutionary new technology for producing diamond segments. The diamonds have a special treatment that ensures an optimal distribution. Also, the diamonds are held in the segment for longer, so they are utilised maximally. The result is blades with superior cutting capacity, longer life and a smooth, rapid cut.
Sandwich shape segments

Low noise wall saw blades: The core is a spot-welded, three-layer sandwich design with a copper centre. Compared to a standard solid core, the noise level is reduced from approx. 95 to approx. 85 dB. (However this figure may vary due to cutting depth, blade diameter etc. With continuous noise, a 10 dB drop represents a halving of the perceived noise.)
Efficient cooling

The design of the segments promotes the efficient cooling of the segments and steel plates, and helps to dispose of the abrasive saw sludge. This provides extremely good cutting properties and long service life.
Design of the segment

The design of the segments is based on power being concentrated to a very small contact surface between the segment and the material to be sawn. This results in a tool that starts in a smooth, controlled manner when you first apply the blade, and that is optimally free-cutting for the duration of its service life.

Technical specifications for W 1205 Diagrip™

Blade specs
Type	Wet
Power range, min-max	10-20 kW / 13.41-26.82 hp(I)
Blade diameter range, min-max	600-1500 mm / 23.62-59.06 "
Center hole diameter	60 mm / 2.36 inch
Power range	Low powered wall saws
Suitable for	WS 325/WS 440 HF

Segment
Segment height	10 mm / 0.39 "
Segment base	3 mm / 0.12 "
Segment length	46 mm / 1.81 "
Segment width	4.7 mm / 0.19 "

Articles for W 1205 Diagrip™

Article no.	Article Description	Blade diameter	Segment width
521 89 11-01	Ø:500mm, Segment width:3.8mm, For low-powered electric saws	600 mm / 25.59 inch	3.8 mm / 0.15 "
521 89 11-02	Ø:500mm, Segment width:3.8mm, For low-powered electric saws with flush cutting holes	500 mm / 19.69 inch	3.8 mm / 0.15 "
521 89 13-01	Ø:600mm, Segment width:4.7mm	600 mm / 23.62 inch	4.7 mm / 0.19 "
521 89 13-02	Ø:600mm, Segment width:4.7mm, with flush cutting holes	600 mm / 23.62 inch	4.7 mm / 0.19 "
521 89 13-03	Ø:600mm, Segment width:3.8mm, For low-powered electric saws	600 mm / 23.62 inch	3.8 mm / 0.15 "
521 89 13-04	Ø:600mm, Segment width:3.8mm, For low-powered electric saws with flush cutting holes	600 mm / 23.62 inch	3.8 mm / 0.15 "
521 89 13-60	Ø:600mm, Segment width:4.7mm, low noise	600 mm / 23.62 inch	4.7 mm / 0.19 "
521 89 13-61	Ø:600mm, Segment width:4.7mm, low noise with flush cutting holes	600 mm / 23.62 inch	4.7 mm / 0.19 "
521 89 14-01	Ø:650mm, Segment width:4.7mm	650 mm / 25.59 inch	4.7 mm / 0.19 "
521 89 14-02	Ø:650mm, Segment width:4.7mm, with flush cutting holes	650 mm / 25.59 inch	4.7 mm / 0.19 "
521 89 15-01	Ø:700mm, Segment width:4.7mm	700 mm / 27.56 inch	4.7 mm / 0.19 "
521 89 15-02	Ø:700mm, Segment width:4.7mm, with flush cutting holes	700 mm / 27.56 inch	4.7 mm / 0.19 "
521 89 15-03	Ø:700mm, Segment width:3.8mm, For low-powered electric saws	700 mm / 27.56 inch	3.8 mm / 0.15 "
521 89 15-04	Ø:700mm, Segment width:3.8mm, For low-powered electric saws with flush cutting holes	700 mm / 27.56 inch	3.8 mm / 0.15 "
521 89 15-60	Ø:700mm, Segment width:4.7mm, low noise	700 mm / 27.56 inch	4.7 mm / 0.19 "
521 89 15-61	Ø:700mm, Segment width:4.7mm, low noise with flush cutting holes	700 mm / 27.56 inch	4.7 mm / 0.19 "
521 89 16-01	Ø:750mm, Segment width:4.7mm	750 mm / 29.53 inch	4.7 mm / 0.19 "
521 89 16-02	Ø:750mm, Segment width:4.7mm, with flush cutting holes	750 mm / 29.53 inch	4.7 mm / 0.19 "
521 89 17-01	Ø:800mm, Segment width:4.7mm	800 mm / 31.5 inch	4.7 mm / 0.19 "
521 89 17-02	Ø:800mm, Segment width:4.7mm, with flush cutting holes	800 mm / 31.5 inch	4.7 mm / 0.19 "
521 89 17-60	Ø:800mm, Segment width:4.7mm, low noise	800 mm / 31.5 inch	4.7 mm / 0.19 "
521 89 17-61	Ø:800mm, Segment width:4.7mm, low noise with flush cutting holes	800 mm / 31.5 inch	4.7 mm / 0.19 "
521 89 18-01	Ø:900mm, Segment width:4.7mm	900 mm / 35.43 inch	4.7 mm / 0.19 "
521 89 18-02	Ø:900mm, Segment width:4.7mm, with flush cutting holes	900 mm / 35.43 inch	4.7 mm / 0.19 "
521 89 18-60	Ø:900mm, Segment width:4.7mm, low noise	900 mm / 35.43 inch	4.7 mm / 0.19 "
521 89 18-61	Ø:900mm, Segment width:4.7mm, low noise with flush cutting holes	900 mm / 35.43 inch	4.7 mm / 0.19 "
521 89 19-01	Ø:1000mm, Segment width:4.5mm	1000 mm / 39.37 inch	4.5 mm / 0.18 "
521 89 19-02	Ø:1000mm, Segment width:4.5mm, with flush cutting holes	1000 mm / 39.37 inch	4.5 mm / 0.18 "
521 89 19-60	Ø:1000mm, Segment width:4.7mm, low noise		4.7 mm / 0.19 "
521 89 19-61	Ø:1000mm, Segment width:4.7mm, low noise with flush cutting holes	1000 mm / 39.37 inch	4.7 mm / 0.19 "
521 89 20-01	Ø:1200mm, Segment width:4.5mm	1200 mm / 47.24 inch	4.5 mm / 0.18 "
521 89 20-02	Ø:1200mm, Segment width:4.5mm, with flush cutting holes	1200 mm / 47.24 inch	4.5 mm / 0.18 "
521 89 20-60	Ø:1200mm, Segment width:4.7mm, low noise	1200 mm / 47.24 inch	4.7 mm / 0.19 "
521 89 20-61	Ø:1200mm, Segment width:4.5mm, low noise with flush cutting holes		4.5 mm / 0.18 "
521 89 21-01	Ø:1500mm, Segment width:4.5mm	1500 mm / 59.06 inch	4.5 mm / 0.18 "
521 89 21-02	Ø:1500mm, Segment width:4.5mm, with flush cutting holes	150 mm / 5.91 inch	4.5 mm / 0.18 "