Husqvarna PP 440 HF

Husqvarna PP 440 HFon kõrgsagedusliku muunduriga jõujaam Husqvarna WS 440 HF jaoks. Seade sobib rakenduste jaoks, kus on vaja kerget transporti tööalale ja selle piires. Seadet saab kasutada kohtades, kus vee kasutamine tuleb hoida minimaalsena.

Eelised ja rakendused
Tehnilised andmed
Lisatarvikud, osad ja kaasnevad tooted
Kasutusjuhend
Dokumentatsioon
Artikli nr

Eelised

Kerge kaal (18 kg) ja kompaktne vorm (584 × 422 × 202 mm).
Saab kasutada 32A kaitsmega ning suure võimsusega spindlil.
Muunduri ja masina vahel on ainult üks kaabel.
Varustatud 230V väljundiga lisavarustuse jaoks.
Kaugjuhitav elektriline veeklapp.
Kaugjuhtimispult tagab operaatorile hulgaliselt informatsiooni (võimsustase, tööaeg, hooldusperiood, vead jne), et tagada saagimisprotsessi üle täielik kontroll ja liikumisvabadus töökohal.

Tehnilised andmed: PP 440 HF

Mootori
Võimsus	15 kW
Pinge	400 V
Voolutugevus	32 A

Varustus
Sobib	WS 440 HF

Safety instructions

Safety instructions

Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operators manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
Connect power pack

Connect power pack 1/4

Make sure the main power switch is set to “0”-mode

Connect incoming power (380-480V, 32 A European connector)

Connect incoming water to the water inlet on power pack.

Connect power pack 2/4

Connect power cable and water hose from the power pack to the saw unit.

Connect power pack 3/4

Connect the remote control using the supplied Canbus cable. Tighten the cable connector screws by hand.

Check that the emergency stop switches on the unit and the remote control have not been actuated by turning them in the direction of the arrow.

Connect power pack 4/4

Set the main power switch to “1”-mode.

The power pack is activated when the indicator lamp is on.

The display now shows “SELECT FUSE”. If the available fuse is 32 A, confirm this by pressing the membrane key marked “OK”.

The display now shows "Husqvarna PP 440HF PRESS START"
Cleaning

Cleaning

Make sure connections and cables are clean and ok. Clean with wipes or brush. Do not use high pressure water for cleaning the power pack.
Service

Service

Check regularly:

Any abnormal noises.

Make sure connections and cables are clean and ok. Clean with wipes or brush.

Do not use high pressure water for cleaning the power pack. Note For more information about maintenance, please check the operator’s manual.