Husqvarna PG 820

Husqvarna PG 820是表面处理和抛光机系列产品中最大的一种。PG 820采用了双驱动技术，具有超大尺寸和超强动力。

优点和应用
Videos
技术规范
推荐的工具
附件、部件和相关产品
用户指南
相关资料下载
产品编号

优点

应用范围

应用范围
应用范围包括混凝土地板的预加工、维修、研磨、抛光，水磨石以及其他自然石材的维修和抛光。
大功率设备

大功率设备
大功率设备可实现极高的生产速度，提高了利润并节省了宝贵的时间。
Dual Drive Technology™

Dual Drive Technology™
拥有专利的双马达结构，一个马达用于驱动研磨锯片，另一个马达用于驱动独立机器，可完全控制头部装置的速度和方向。与任何其他独立机器相比，生产率更高，操作员控制力度更大，应用范围更广。

三研磨盘构造具有诸多特色和前所未有的一系列应用。双驱动技术，主磨盘和行星磨盘的转速和方向可以完全独立的控制。具有极高的生产率，可以迅速清除极其坚固的表面和涂层，以及抛光工业用和商业用地面。工具配备成本低。能够提供比其他4研磨盘地坪打磨机更一致的研磨地面。研磨路径宽，与5500吸尘器一同使用时，可以实现无尘应用。可以用于干式和湿式研磨。

具有人机工程学优点

框架及手柄的设计可在操作时使身体受到较低的冲击。
堪称一流

无论是第一次使用还是已使用了一段时间，本产品在性能、可靠性和使用寿命方面均堪称一流。独特的 5 路密封机构可保护轴承和内部零部件不会受到侵蚀性的混凝土灰尘和泥浆的影响。
Redi-lock

Husqvarna 的 Redi LockTM 是一个即时的无障碍系统，可用于更换金刚石刀具。坚固的结构确保提供最大的保护和延长金刚石刀具的使用寿命。
方便使用控制箱

控制箱的标记清晰且易于使用。监控机器上的不同功能。

PG 820 的技术规范

引擎
功率	12,5 kW
安培数	32 A
电压	380 / 480 V
阶段	3

规格
研磨研磨	820 mm

尺寸
重量	440 kg

推荐的工具

型号	G 11X1 D	Redi Lock G 1170	Redi Lock G 1140	Redi Lock G 1150	Redi Lock G 1120	Redi Lock G 1180	Redi Lock G 1170	Redi Lock G 1140	Redi Lock G 1120	Redi Lock G 1110	Redi Lock G 1110	Redi Lock G 1140	Redi Lock G 1110	Redi Lock G 1110
最佳良好可接受 —
材料

Safety instructions

Safety instructions

Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operator’s manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
Unpacking

Unpacking

To prevent damage to the Grindng shrould when unpacking and transporting ensure to follow the recommended procedure as outline in the supporting video.
Setup workspace

Setup workspace

Position grinder on the working area. Set handle in upright position (illustrated right).

Pull back on handle using the kicker bar to lift grinding head off the ground.

Lay machine back on the ground.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Assembling diamonds

Assembling diamonds 1/3

Have a set of gloves ready, as diamonds can get very hot during dry grinding applications.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.

Assembling diamonds 2/3

As different applications require different selections of diamond tools, there will be many occasions when the grinding discs need to be changed.

Place diamonds as shown in the Redi Lock™ diamond holder disc and secure by tapping lightly. Assembly discs on planetary head lock screws by slightly rotating it.

Note

When using the machine, each grinding head should always have the same diamond type and number of diamonds as the other grinding heads. Each grinding head must have diamonds the same height as the other grinding heads.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.

Assembling diamonds 3/3

Once new diamonds have been attached, reverse procedure to lower machine to ground.

Adjust rubber skirt so that a good seal is established between the floor and head of the machine. Ensure join in skirt is at the front of the machine to allow for better air flow. Setting of the skirt is essential to obtain good dust extraction and minimise the possibility of airborne dust.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Adjusting Handlebar

Adjusting handlebar

Set handle to most comfortable working height using adjustment lever.

Note

It is recommended that this height be set as close as possible to the height of the operator’s hip bone. When the machine is running, there can be a slight grinding force/pull to one side that can be felt through the handlebars. Use the hip to resist this force instead of trying to control this through the arms (such positioning will be much easier for the operator using the machine over prolonged periods of time).
Connect DC

Connect DC

-Connect the hose to the PG Grinder.

-Connect the hose to the DC.

-Attach the plastic bag to the DC, if this is not already in place.

-Plug in the power cable to the DC.

Note

The power cable dipictad in the footage may vary from region to region.
Powering up machine

Powering up machine

Ensure the STOP/RUN switch is set on Stop (rotate counter clockwise).

Plug power supply to machine. Only turn power on at plug once fully connected.

Disengage Emergency Stop button (twist clockwise).

Depress Power button. On doing so, a soft “clunk” should be heard to come from within the electrical cabinet. This indicates the line contactors have engaged, supplying power to the drives/frequency converters.

Note

The power cable dipictad in the footage may vary from region to region.

Note

Always have the DC Vac running before starting to run the Grinder
Smooth start

Smooth start

Standing behind machine with handlebars set as described earlier, apply a small amount of downward pressure on the handle. Switch the machine to run mode using the STOP/RUN switch on the control panel.

The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.
Setting speed and rotation

Setting Speed and rotation 1/2

On the control panel there is a FORWARD / REVERSE and Speed dial. When starting the machine for the first time on any given application, it is advised that the speed setting should not exceed 7 on start up. As the application allows speeds may be increased during operation.

The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.

Setting Speed and rotation 2/2

Speed settings should be adapted to the specific application. This will differ from application to application and tools configurations.

For example having a faster satalite speed and slower planetary speed will allow the diamond tools to concertrate in the same area for a longer period of time, giving a higher stock removal rate.

In order to achieve maximum effiency different settings will be required.
Dual drive Technology

Dual Drive Technology™

Two types of planetary effects can be achieved with Dual Drive Technology™ – counter rotation and same direction rotation. Each of them creates a different dynamic under the machine and therefore, a different result in the grinding.
Counter rotation

Counter rotation 1/2

While in counter rotation, the diamonds closer to the centre of the machine move in the direction to the planetary rotation.

The diamonds toward the outside move away from the direction of planetary rotation.

As the inner diamonds are being accelerated in the direction of planatery rotation they grind more aggressively creating an inner band where the machine cuts more effectively.

Counter rotation 2/2

When the machine is moved forward, the middle zone is ground more thoroughtly then the outer zones. The end result is a deeper cut through the middle zone when compared to the outer zones.
Same direction rotation

Same direction rotation 1/2

While in same direction rotation, the diamonds closer to the centre of the machine move in the opposite direction to the planetry rotation.

The diamonds toward the outside move in the direction of planetary rotation.

As the outer diamonds are being accelerated in the direction of planatery rotation they grind more aggressively creating an outer band where the machine cuts more effectively.

Same direction rotation 2/2

When the machine is moved forward, the middle zone is still ground more thoroughtly then the outer zones but not as much as in the case of counter rotation. The end result is a more even cut through the middle zone when compared to the outer zones, which is less prominate then in counter rotation.
Grind-pattern relevancy

Relevance of grindning patterns

All planetary grinders remove more stock from the middle of the grinder. Always overlap the outer zones to ensure efficient and clean grinding.

Remember to change the grinding rotation each pass to maintain a uniformed direction over the floor.
Grinding close to a wall

Grinding close to a wall

When the machine is in operation it will slightly pull to one side. This force is determined by the planetary head rotation. When the head of the machine pulls in to the wall the operator will get a much closer cut to the wall.

A comfortable operating position should allow the handle bar to rest firmly against the operator´s hip.
Diamond selection

Diamond selection

The way diamond segments are set-up on the grinding heads of the machine will also greatly influence the performance of the machine, the productivity levels and also the finished floor quality.
Application reference
Full set vs Half set

Full set vs Half set 1/3

There are basically two types of diamond configurations that can be used when using the Husqvarna PG grinders:

Full set of diamonds: When there are diamonds placed at all positions on the diamond holder discs.

Half set of diamonds: When there are diamonds placed at each alternating positions on the diamond holder discs.

By changing the way the diamonds are set-up on the diamond holder discs, an operator can significantly affect the performance of the machine and therefore the finished product.

Full set vs Half set 2/3

A full set of diamonds will cut a flater floor when compared to a half set of diamonds.

The full set will remove all the high spots instead of carring with the surface of the floor and droping down into the low or softer spots.

With a full set of diamonds the highest level of flatness will be achivied.

Full set vs Half set 3/3

A half set of diamonds will follow the surface of the floor.

The grinder can be placed on an uneven surface and yet still find a stable footing. The half-set diamond configuration should be used when a flat floor is not required.

The half set will carry over the high spots and into the low spots, which is ideal to remove floor coatings or glues where optimum flatness is not the overall objective.
Diamond vs single segment

Diamond vs single segment 1/3

As well as using full set and half set, the operator can also choose from double or single segment tools. This will enable the operator to have control over both his tool economy and productivity.

Double segments: A double segment tool consists of two diamond segments on one Redi Lock™ shoe.

Single segments: A single segment tool consists of one diamond segments on one Redi Lock™ shoe.

Diamond vs single segment 2/3

Double segments are more commonly used as there is less preasure on each diamond segment resulting in lower cost and longer tool life. In principle double segments are used on softer concrete to prevent unwanted excess removal of the concrete stock.

Diamond vs single segment 3/3

A single segment is more commonly used on very hard surfaces as this increases the grinding pressure per diamond segment. This will result in a higher productivity and more aggressive concrete stock removal.

A significantly shorter tool life can be expected when using single segments due to the increase in segment preasure.

Husqvarna PG 820

优点

应用范围

大功率设备

Dual Drive Technology™

具有人机工程学优点

堪称一流

Redi-lock

方便使用控制箱

Videos

PG 820 的技术规范

推荐的工具

型号

PG 820 的附件

Safety instructions

Safety instructions

Unpacking

Unpacking

Setup workspace

Setup workspace

Assembling diamonds

Assembling diamonds 1/3

Assembling diamonds 2/3

Assembling diamonds 3/3

Adjusting Handlebar

Adjusting handlebar

Connect DC

Connect DC

Powering up machine

Powering up machine

Smooth start

Smooth start

Setting speed and rotation

Setting Speed and rotation 1/2

Setting Speed and rotation 2/2

Dual drive Technology

Dual Drive Technology™

Counter rotation

Counter rotation 1/2

Counter rotation 2/2

Same direction rotation

Same direction rotation 1/2

Same direction rotation 2/2

Grind-pattern relevancy

Relevance of grindning patterns

Grinding close to a wall

Grinding close to a wall

Diamond selection

Diamond selection

Application reference

Full set vs Half set

Full set vs Half set 1/3

Full set vs Half set 2/3

Full set vs Half set 3/3

Diamond vs single segment

Diamond vs single segment 1/3

Diamond vs single segment 2/3

Diamond vs single segment 3/3

有关 PG 820 的文档

有关 PG 820 的产品