Husqvarna PG 530

Husqvarna PG 530是一种单相行星研磨盘，具有无可匹敌的性能，最适合住宅和轻型商业用途。专门为220-240V电压范围设计（3相型号也同时提供）。530中融入了最新的技术，可以比同类别的任何3头行星研磨机提供更大的功率的更强的性能。

优点和应用
技术规范
推荐的工具
附件、部件和相关产品
用户指南
相关资料下载

优点

应用范围

应用范围
应用范围包括混凝土地板的预加工、维修、研磨、抛光，水磨石以及其他自然石材的维修和抛光。
大功率设备

大功率设备
大功率设备可实现极高的生产速度，提高了利润并节省了宝贵的时间。
坚固可靠的设备

坚固可靠的设备
出众的工业强度结构使设备不仅美观而且非常坚固。
具有多种用途

具有多种用途
具有多种用途。功能强大的设备产品。
接受全面检验

接受全面检验
已在实际工程中接受了全面检验，可为大多数应用场合提供技术有效性保障。
低成本

低成本
较低的每平方米／英尺工具和维护成本。
5 路密封机构

5 路密封机构
独特的 5 路密封机构可防止混凝土灰尘和泥浆进入到轴承和内部零件，从而延长机械在第一次维护前以及后续维护之间的使用寿命。
Redi-lock

Redi-lock
Husqvarna 的 Redi LockTM 是一个即时的无障碍系统，可用于更换金刚石刀具。坚固的结构确保提供最大的保护和延长金刚石刀具的使用寿命。
表面处理和抛光

表面处理和抛光
PG 530、PG 680 和 PG 820 机器的性能极高，可满足所有类型的抛光和研磨应用。干湿研磨均可。三头研磨机为研磨头提供更大的向下压力和动力，从而保证波状表面上的操作稳定。

三头研磨器具有诸多特色和前所未有的一系列应用。可选双驱动技术。具有极高的生产率，可以迅速清除极其坚固的表面和涂层以及抛光轻型工业级和住宅级的地面。 FWD/REV运行具有可变速度控制。操纵方便，使操作的控制能力得到加强。仅重200kg。工具配备成本低。能够比其他的4头研磨机提供更加一致的研磨表面。与5500吸尘器一同使用时可以实现无尘应用，而且既可以用于湿式，也可以干式研磨。

具有人机工程学优点

框架及手柄的设计可在操作时使身体受到较低的冲击。
堪称一流

无论是第一次使用还是已使用了一段时间，本产品在性能、可靠性和使用寿命方面均堪称一流。独特的 5 路密封机构可保护轴承和内部零部件不会受到侵蚀性的混凝土灰尘和泥浆的影响。
坚固的橡胶轮

坚固的橡胶轮帮助机器提供更平稳的切割和抛光。
方便使用控制箱

控制箱的标记清晰且易于使用。监控机器上的不同功能。

PG 530 的技术规范

引擎
功率	3,73 kW
安培数	16 A
电压	220 / 480 V
阶段	3

规格
研磨研磨	530 mm

尺寸
重量	215,46 kg

推荐的工具

型号	G 11X1	Redi Lock G 1110	Redi Lock G 1120	Redi Lock G 1140	Redi Lock G 1150	Redi Lock G 1170	Redi Lock G 1180
最佳良好可接受 —
材料

Safety instructions

Safety instructions

Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operator’s manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
Unpacking

Unpacking

To prevent damage to the Grindng shrould when unpacking and transporting ensure to follow the recommended procedure as outline in the supporting video.
Setup workspace

Setup workspace

Position grinder on the working area. Set handle in upright position (illustrated right).

Pull back on handle using the kicker bar to lift grinding head off the ground.

Lay machine back on the ground.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Assembling diamonds

Assembling diamonds 1/3

Have a set of gloves ready, as diamonds can get very hot during dry grinding applications.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.

Assembling diamonds 2/3

As different applications require different selections of diamond tools, there will be many occasions when the grinding discs need to be changed.

Place diamonds as shown in the Redi Lock™ diamond holder disc and secure by tapping lightly. Assembly discs on planetary head lock screws by slightly rotating it.

Note

When using the machine, each grinding head should always have the same diamond type and number of diamonds as the other grinding heads. Each grinding head must have diamonds the same height as the other grinding heads.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.

Assembling diamonds 3/3

Adjust rubber skirt so that a good seal is established between the floor and head of the machine. Ensure join in skirt is at the front of the machine to allow for better air flow. Setting of the skirt is essential to obtain good dust extraction and minimise the possibility of airborne dust.

WARNING!

Ensure STOP/RUN switch is in STOP position as unintentional starting of machine while changing discs can result in serious injury.
Adjusting Handlebar

Adjusting handlebar

Set handle to most comfortable working height using adjustment lever.

Note

It is recommended that this height be set as close as possible to the height of the operator’s hip bone. When the machine is running, there can be a slight grinding force/pull to one side that can be felt through the handlebars. Use the hip to resist this force instead of trying to control this through the arms (such positioning will be much easier for the operator using the machine over prolonged periods of time).
Connect DC

Connect DC

-Connect the hose to the PG Grinder.

-Connect the hose to the DC.

-Attach the plastic bag to the DC, if this is not already in place.

-Plug in the power cable to the DC.

Note

The power cable dipictad in the footage may vary from region to region.
Powering up machine

Powering up machine

Ensure the STOP/RUN switch is set on Stop (rotate counter clockwise).

Plug power supply to machine. Only turn power on at plug once fully connected.

Disengage Emergency Stop button (twist clockwise).

Depress Power button. On doing so, a soft “clunk” should be heard to come from within the electrical cabinet. This indicates the line contactors have engaged, supplying power to the drives/frequency converters.

Note

The power cable dipictad in the footage may vary from region to region.

Note

Always have the DC Vac running before starting to run the Grinder
Smooth start

Smooth start

Standing behind machine with handlebars set as described earlier, apply a small amount of downward pressure on the handle. Switch the machine to run mode using the STOP/RUN switch on the control panel.

The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.
Setting speed and rotation

Setting Speed and rotation

On the control panel there is a FORWARD / REVERSE and Speed dial knob. Generally, when starting the machine for the first time on any given application, it is advised the speed setting should not exceed 7, initially. When the operator is comfortable with the application, speed may be increased.

The machine should start smoothly and accelerate to the selected speed over a period of 5 seconds.
Same direction rotation

Same direction rotation 1/2

While in same direction rotation, the diamonds closer to the centre of the machine move in the opposite direction to the planetry rotation.

The diamonds toward the outside move in the direction of planetary rotation.

As the outer diamonds are being accelerated in the direction of planatery rotation they grind more aggressively creating an outer band where the machine cuts more effectively.

Same direction rotation 2/2

When the machine is moved forward, the middle zone is still ground more thoroughtly then the outer zones but not as much as in the case of counter rotation. The end result is a more even cut through the middle zone when compared to the outer zones, which is less prominate then in counter rotation.
Grind-pattern relevancy

Relevance of grind-patterns

All planetary grinders remove more stock from the middle of the grinder. Always overlap the outer zones to ensure efficient and clean grinding.

Remember to change the grinding rotation each pass to maintain a uniformed direction over the floor.
Grinding close to a wall

Grinding close to a wall

When the machine is in operation it will slightly pull to one side. This force is determined by the planetary head rotation. When the head of the machine pulls in to the wall the operator will get a much closer cut to the wall.

A comfortable operating position should allow the handle bar to rest firmly against the operator´s hip.
Diamond selection

Diamond selection

The way diamond segments are set-up on the grinding heads of the machine will also greatly influence the performance of the machine, the productivity levels and also the finished floor quality.
Application reference
Full set vs Half set

Full set vs Half set 1/3

There are basically two types of diamond configurations that can be used when using the Husqvarna PG grinders:

Full set of diamonds. When there are diamonds placed at all positions on the diamond holder discs.

Half set of diamonds. When there are diamonds placed at each alternating positions on the diamond holder discs.

By changing the way the diamonds are set-up on the diamond holder discs, an operator can significantly affect the performance of the machine and therefore the finished product.

Full set vs Half set 2/3

A full set of diamonds will cut a flater floor when compared to a half set of diamonds.

The full set will remove all the high spots instead of carring with the surface of the floor and droping down into the low or softer spots.

With a full set of diamonds the highest level of flatness will be achivied.

Full set vs Half set 3/3

A half set of diamonds will follow the surface of the floor.

The grinder can be placed on an uneven surface and yet still find a stable footing. The half-set diamond configuration should be used when a flat floor is not required.

The half set will carry over the high spots and into the low spots, which is ideal to remove floor coatings or glues where optimum flatness is not the overall objective.
Diamond vs single segment

Diamond vs single segment 1/3

As well as using full set and half set, the operator can also choose from double or single segment tools. This will enable the operator to have control over both his tool economy and productivity.

Double segments: A double segment tool consists of two diamond segments on one Redi Lock™ shoe.

Single segments: A single segment tool consists of one diamond segments on one Redi Lock™ shoe.

Diamond vs single segment 2/3

Double segments are more commonly used as there is less preasure on each diamond segment resulting in lower cost and longer tool life. In principle double segments are used on softer concrete to prevent unwanted excess removal of the concrete stock.

Diamond vs single segment 3/3

A single segment is more commonly used on very hard surfaces as this increases the grinding pressure per diamond segment. This will result in a higher productivity and more aggressive concrete stock removal.

A significantly shorter tool life can be expected when using single segments due to the increase in segment preasure.

Husqvarna PG 530

优点

应用范围

大功率设备

坚固可靠的设备

具有多种用途

接受全面检验

低成本

5 路密封机构

Redi-lock

表面处理和抛光

具有人机工程学优点

堪称一流

坚固的橡胶轮

方便使用控制箱

PG 530 的技术规范

推荐的工具

型号

PG 530 的附件

PG 530

Safety instructions

Safety instructions

Unpacking

Unpacking

Setup workspace

Setup workspace

Assembling diamonds

Assembling diamonds 1/3

Assembling diamonds 2/3

Assembling diamonds 3/3

Adjusting Handlebar

Adjusting handlebar

Connect DC

Connect DC

Powering up machine

Powering up machine

Smooth start

Smooth start

Setting speed and rotation

Setting Speed and rotation

Same direction rotation

Same direction rotation 1/2

Same direction rotation 2/2

Grind-pattern relevancy

Relevance of grind-patterns

Grinding close to a wall

Grinding close to a wall

Diamond selection

Diamond selection

Application reference

Full set vs Half set

Full set vs Half set 1/3

Full set vs Half set 2/3

Full set vs Half set 3/3

Diamond vs single segment

Diamond vs single segment 1/3

Diamond vs single segment 2/3

Diamond vs single segment 3/3

有关 PG 530 的文档