Husqvarna DS 50 Gyro

Husqvarna DS 50 Gyro是一种可以使用大多数钻头的伸缩式钻台系统。模块化的系统和钻台的灵活性使其可以在墙体、地板和天花板上进行直钻和转角钻。包括2种基板。

优点和应用
Videos
技术规范
附件、部件和相关产品
用户指南
相关资料下载

优点

配有钻台和钻柱、经过橡胶浸渍的板架和带滚轮的极板。这种钻台可以使用直径达14"的钻头，可以达到24"的钻孔行程。手柄设置平衡，刀架和钻机便于携带。

灵活性

Husqvarna Gyro是一种灵活的模块式系统，它具有多种组合方式，钻柱可以旋转360°，几乎能够以各种角度进行钻孔。
新开发的机架

钻台配有最新开发的机架，它配有单/双传动装置，还有一个用于简便安装钻孔马达的快速连接器。
钻塔通过支柱固定。

在地板上钻孔时，使用支柱顶住天花板以固定钻塔。钻柱通过支柱螺钉固定在基板上。
Gyro单元

由于配有gyro单元，钻柱可以转动360°。

应用

角向钻孔

角向钻孔
在无级可调节角度钻孔。
水平钻孔

水平钻孔
水平钻孔。
垂直钻孔

垂直钻孔
朝上及朝下钻孔。

DS 50 Gyro 的技术规范

切割设备
最大钻头直径	350 mm
最大行程	670/0 mm

钻柱
倾斜	连续
偏角调节	+/-90º
长度，伸缩支柱	3,1 m

其他规格
适用于	DM 280

尺寸
重量（不包括切割设备）	56,5 kg
包装尺寸，长x宽x高	1981,2x914,4x609,6 mm
包括包装重量	70 kg
包括刀架重量	56,5 kg

DS 50 Gyro 的配套产品

DM 340

Husqvarna 制造的简单易用的动力钻具。DM 340 配备符合人机工程学要求的手柄，非常便于携带。所有控件的设计和...
DM 310

这是一种高效的电动钻孔马达，钻头直径范围为30至300 mm。钻机具有5个传动级别，能够提供最佳的切割速度。
AD 10

AD 10 是一个独特的自动钻机设备，在智能化、速度、工效学方面独树一帜。通过结合我们的钻机马达和钻台，本装置可提供高效...

DS 50 Gyro 的附件

工具套件

工具套件
扩展件

具有3种不同的扩展件型号，可以提高钻塔和钻核收集器的性能。一个配有内部机架，两个配有外部机架。长度皆为0.75 m。...
扩展件

具有3种不同的扩展件型号，可以提高钻塔和钻核收集器的性能。一个配有内部机架，两个配有外部机架。长度皆为0.75 m。...
CD 40

Husqvarna Core Down系统CD 40是一种用于安全收集和移除混凝土钻核的实用、安全和易于使用的钻核收集器...
转角钻孔工具

Angled anchor support.
货车平台

可以与货车配套使用的支撑平台。
偏移臂

用于受限空间内的钻孔作业。
转角钻孔工具

Stop rubber foot, to facilitate angle drilling.
转角钻孔工具

Stop ring for measuring drill depth.
快速安装间隔件

用较大钻头钻孔时使用的间隔件。 50 mm间隙。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
集水器系统

在使用电动钻孔马达进行架空垂直钻孔时用于收集泥浆和水。
AD 10

AD 10 是一个独特的自动钻机设备，在智能化、速度、工效学方面独树一帜。通过结合我们的钻机马达和钻台，本装置可提供高效...

Safety instructions

Safety instructions

Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operators manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
Mount for wall drilling

Mount for wall drilling

Place the drill stand one column’s length from the wall.

Clamp the telescopic column to the ceiling. Lock and secure the rig by tighten the locking screw using a 24 mm spanner.
Drill motor attachment

Drill motor attachment

The feed housing on the drill stand consists of a quick-action attachment for drill motors.

Fit the drilling machine in the quick-action attachment.

Use the feeding handle to lock and secure the drill motor.
Fit the drill bit

Fit the drill bit

Fit the drill bit on the spindle axis on the motor anti-clockwise (seen from the motor)
Mount the drill column

Mount the drill bit

Change height of the column by releasing the catch on the wall rail at the same time as the height is adjusted with the adjustment handle.

Fold up the drill column and secure with the L-handle and locking bolt (30 mm).

Screw in the front screw against the wall to secure the drill column.
Water and electricity

Water and electricity

Connect water and electric power. Make sure the PRCD is reset.
Drilling

Drilling

Switch on the drill motor.

Unlock the locking handle placed on the left side of the feed housing.

Feed the drill motor with the handle. WARNING! Before drilling, check that all locking screws are tightened well. Serious accidents can occur if the concrete core remains in the drill when backing out the drill motor/drill bit from the floor, wall or ceiling. A maximum of one extension module may be used.
Dismantle the drill stand

Dismantle the drill stand

Use the necessary spanners for drill bit and drill motor to remove the drill bit.

Lock the carriage with machine on the drill column.

Loosen the front screw from the wall.

Disconnect water and electric power.

Loosen the locking bolt and the L-handle to fold down the drill column.

Lower the telescopic column to transport position.

Roll out the drill rig.
Cleaning

Cleaning

It is very important that the drill rig is kept clean and tidy in order to maintain its function. The rig is suitably cleaned using a high pressure washer and then wiped dry.
Lubrication

Lubrication

After washing it is important that the rig’s moving parts are lubricated using standard grease to counteract corrosion on the contact surfaces.
Description

Description

The drill column has an approximately drilling height range from 0 meters to 1,3 meter. When drilling is needed above that limit the telescopic column needs to be turned.

When the Gyro is turned, the drilling height range is approximately from 0,3 meters to 3,1 meters (excl. extensions).
Operation

Operation

Simply free the telescopic column from the drill column, base plate and ceiling plate. Turn the telescopic column around and fit it all together again.

Start the drilling operation!
Description

Description

The Husqvarna Gyro is a modular, flexible system with several combination options, where the drill column can be rotated 360º, for drilling in almost every angle.
Operation

Operation

Fit the rubber foot (accessory) on the drill column top screw.

Adjust the angle of the drill column to match the given hole and secure it.

Secure the rubber foot against the wall and secure it.

Start the machine and drill the hole! WARNING! Before drilling, check that all locking screws are tightened well. Serious accidents can occur if the concrete core remains in the drill when backing out the drill motor/drill bit from the floor, wall or ceiling. A maximum of one extension module may be used.
Description

Description

The main issue about drilling up-side down is that a lot of water has to be taken care of. The drill bit has to be filled with water and the drill motor has to be protected against the flood of water expected when operating. Therefore often a hydraulic motor is suggested, with no electric parts to protect. Also the operator, who stands directly beneath, suffers from the water.
Operation

Operation

With the Gyro accessory, up-side down vertical system, drilling is easy. Together with the DS 50 Gyro this system allows to collect 99 percent of the water when drilling in the ceiling. It also allows using a single phase electric motor. The bellows is easily fitted on the spindle axis and the drill bit inside the water collector.
Description

Description

The Husqvarna Core Down System, CD 40, is a practical, safe and easy to use drill core collector for the safe collection and removal of concrete drill cores.
Operation

Operation

Place the CD 40 in line with the drilled hole.

Clamp the CD 40 to the ceiling by loosen the handle and lift it against the ceiling and fasten it.

Lift the wall collector, place it by the drill bit/core and secure.

Lift the drill bit/core and place it in the collector.

Grab the handle and slowly lower the collector until safe height is reached.

Remove the drill bit/core.
Description

Description

The unique range of water collection system includes vacuum-hold collectors of different design for different use.

The V-shaped collector for stitch drilling

The circular collector for normal drilling

The half-circular collector for drilling close to the wall/floor.
Operation

Operation

Simply hold the water collector to the wall and connect the wet vacuum cleaner to it. The vacuum will hold the collector and will also take care of almost all water coming from the drill bit.
Description

Description

When drilling in small, confined spaces, it might be tricky to fit the DS 50 Gyro. To obtain the flexibility using the Gyro system an accessory has been developed for this
Operation

Operation

With the Gyro accessory, offset arm, drilling in confined spaces are easy. The arm has the possibility to rotate 360º around its own axis in both ends. The drill column can also be moved back and forward to fit the small working area. Simply fit the offset arm between the wall rail and drill column.

Husqvarna DS 50 Gyro

优点

灵活性

新开发的机架

钻塔通过支柱固定。

Gyro单元

应用

角向钻孔

水平钻孔

垂直钻孔

Videos

DS 50 Gyro 的技术规范

DS 50 Gyro 的配套产品

DS 50 Gyro 的附件

Safety instructions

Safety instructions

Mount for wall drilling

Mount for wall drilling

Drill motor attachment

Drill motor attachment

Fit the drill bit

Fit the drill bit

Mount the drill column

Mount the drill bit

Water and electricity

Water and electricity

Drilling

Drilling

Dismantle the drill stand

Dismantle the drill stand

Cleaning

Cleaning

Lubrication

Lubrication

Description

Description

Operation

Operation

Description

Description

Operation

Operation

Description

Description

Operation

Operation

Description

Description

Operation

Operation

Description

Description

Operation

Operation

Description

Description

Operation

Operation

有关 DS 50 Gyro 的文档