Husqvarna DS 50 AT

这种钻台可以转动和倾斜，配有可使用扩展螺栓的基板。钻台配有双传动刀架。

优点和应用
技术规范
附件、部件和相关产品
用户指南
相关资料下载

优点

新开发的机架

钻台配有最新开发的机架，它配有单/双传动装置，还有一个用于简便安装钻孔马达的快速连接器。
运输滚轮

平台配有运输滚轮。

应用

角向钻孔

角向钻孔
在无级可调节角度钻孔。
针钻

针钻
在各自附近打钻多重孔口，形成缺口。

DS 50 AT 的技术规范

切割设备
最大钻头直径	300 mm
最大行程	609,6/0 mm

钻柱
倾斜	连续
偏角调节	+/-90º

其他规格
适用于	DM 280

尺寸
重量（不包括切割设备）	63,45 kg
包装尺寸，长x宽x高	1981,2x914,4x609,6 mm
包括包装重量	69,75 kg

DS 50 AT 的配套产品

DM 340

Husqvarna 制造的简单易用的动力钻具。DM 340 配备符合人机工程学要求的手柄，非常便于携带。所有控件的设计和...
DM 310

这是一种高效的电动钻孔马达，钻头直径范围为30至300 mm。钻机具有5个传动级别，能够提供最佳的切割速度。
AD 10

AD 10 是一个独特的自动钻机设备，在智能化、速度、工效学方面独树一帜。通过结合我们的钻机马达和钻台，本装置可提供高效...

DS 50 AT 的附件

工具套件

工具套件
后部支撑件

后部支撑件
Small-diameter vacuum plate

Small-diameter vacuum plate.
VP 200

真空泵大功率电动马达和管状水箱。配有压力表、2 m长水管和排气阀。
CD 40

Husqvarna Core Down系统CD 40是一种用于安全收集和移除混凝土钻核的实用、安全和易于使用的钻核收集器...
紧固套件

标准紧固套件配有大尺寸翼形螺母、厚垫圈、固定螺钉、指示器和 Different anchors must be used...
紧固套件

标准紧固套件配有大尺寸翼形螺母、厚垫圈、固定螺钉、指示器和 Different anchors must be used...
紧固套件

标准紧固套件配有大尺寸翼形螺母、厚垫圈、固定螺钉、指示器和 Different anchors must be used...
紧固套件

标准紧固套件配有大尺寸翼形螺母、厚垫圈、固定螺钉、指示器和 Different anchors must be used...
转角钻孔工具

Stop ring for measuring drill depth.
货车平台

可以与货车配套使用的支撑平台。
快速安装间隔件

用较大钻头钻孔时使用的间隔件。 50 mm间隙。
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
V型泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
V型泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...
泥浆收集器

我们提供多种多样的水/泥浆收集器。这包括一系列用于不同钻头直径的尺寸，适合多种Husqvarna钻台。我们还提供一系...

Safety instructions

Safety instructions

Under no circumstances may the machine be started without having read the operators manual and paid special intensions to the safety instructions found in the operators manual. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety instructions, still feel uncertain about the safety risks involved you must not use the machine. Please contact your dealer for more information.
Floor mounting

Floor mounting

Drill a 15 mm hole for the M12 expander bolt.

Put the drill stand over the expander bolt and tighten the drill stand with a M12 bolt.

Adjust the level screws to reach stability and straightness for the drill stand.
Drill motor attachment

Drill motor attachments

The feed housing on the drill stand consists of a quick-action attachment for drill motors.

Fit the drilling machine in the quick-action attachment.

Use the feeding handle to lock and secure the drill motor.
Pivot the column

Pivot the column

Loosen the bolt on the lower right side of the column.

Loosen the quick connector bolt on the lower back side of the column. (This has four 90 degrees positions to lock in).

Rotate the column (360 degrees) to match the correct position.

Lock the two bolts to secure the column.
Tilt the column

Tilt the column

Loosen the two bolts on the base plate.

Adjust the column to match the correct angle. (0 – 180 degrees)

Lock the two bolts to secure the column.
Fit the drill bit

Fit the drill bit

Fit the drill bit on the spindle axis on the motor anti-clockwise (seen from the motor)
Water and electricity

Water and electricity

Connect water and electric power. Make sure the PRCD is reset.
Drilling

Drilling

Switch on the drill motor

Unlock the locking handle placed on the left side of the feed housing.

Feed the drill motor with the handle WARNING Before drilling, check that all locking screws are tightened well. Serious accidents can occur if the concrete core remains in the drill when backing out the drill motor/drill bit from the floor, wall or ceiling. A maximum of one extension module may be used.
Cleaning

Cleaning

It is very important that the drill rig is kept clean and tidy in order to maintain its function. The rig is suitably cleaned using a high pressure washer and then wiped dry.
Lubrication

Lubrication

After washing it is important that the rig’s moving parts are lubricated using standard grease to counteract corrosion on the contact surfaces.
Description

Description

When drilling in an angle, the column is tilted to fit the correct angle (0-180 degrees). The down side of drilling in angle is that the column loses travel length and an extension must often be added to the drill bit. By using the DS 50/70 which can be pivoted as the same time as tilted the travel length is gained back.
Operation

Operation

In this application the DS 70 is used (same functions as on the DS 50). The drilling is performed with both an angled and a tilted column.
Description

Pivoted drilling

When drilling in confined spaces or a series of holes the pivot function is usable. By simply pivot the column (360 degrees) to a given hole, a lot of time is saved instead of having to re-place the drill stand for each hole.
Operation

Operation

By loosing the pivot screws the column can be pivoted to the given position. A safe and time saving step to prevent reattaching the drill stand for a new position or location.
Description

Description

The Husqvarna Core Down System, CD 40, is a practical, safe and easy to use drill core collector for the safe collection and removal of concrete drill cores.
Operation

Operation

Place the CD 40 in line with the drilled hole.

Clamp the system to the ceiling by loosen the handle and lift it against the ceiling and fasten it. <rbNot></rbNot> Lift the wall collector, place it by the drill bit/core and secure.

Lift the drill bit/core and place it in the collector.

Grab the handle and slowly lower the collector until safe height is reached.

Remove the drill bit/core.
Description

Description

The unique range of water collection system includes vacuum-hold collectors of different design for different use.

The V-shaped collector for stitch drilling

The circular collector for normal drilling

The half-circular collector for drilling close to the wall/floor.
Operation

操作

Simply hold the water collector to the wall and connect the wet vacuum cleaner to it. The vacuum will hold the collector and will also take care of almost all water coming from the drill bit.

Husqvarna DS 50 AT

优点

新开发的机架

运输滚轮

应用

角向钻孔

针钻

DS 50 AT 的技术规范

DS 50 AT 的配套产品

DS 50 AT 的附件

Small-diameter vacuum plate

Safety instructions

Safety instructions

Floor mounting

Floor mounting

Drill motor attachment

Drill motor attachments

Pivot the column

Pivot the column

Tilt the column

Tilt the column

Fit the drill bit

Fit the drill bit

Water and electricity

Water and electricity

Drilling

Drilling

Cleaning

Cleaning

Lubrication

Lubrication

Description

Description

Operation

Operation

Description

Pivoted drilling

Operation

Operation

Description

Description

Operation

Operation

Description

Description

Operation

操作

有关 DS 50 AT 的文档